Wherever you may live in the United States, may it be in a cool area or a hot one, it is most likely that you have at least one air conditioning system in your home. The average American usually has their home equipped with an AC system that they can rely on during warmer days. Air conditioning system manufacturers can make sure that they only use the best construction materials for these machines; however, if these are not properly maintained by the homeowner, there is a high possibility that there could be some AC repairs needed to be done on these.

The more that you use an AC system, the more prone it is to wear and tear. If, for example, the manufacturer has guaranteed that the AC system that you have purchased can last for at least 20 years or so, they assume that the service life of their product can extend up to that given proper maintenance. It is the job of the manufacturers to make sure that they release a competitive product that is priced reasonable for its quality. At some point, they shall also be held responsible for a certain warranty, but it could only last up until a year or so after the date of purchase. The maintenance of these AC systems are all in the hands of the user.

Why Is Proper Maintenance For Air Conditioning Systems Important

If you want to ditch the costly bill that an AC repair can bring, you have to make sure that your air conditioning systems are well-maintained. Although it sounds like going this route would be a lot easier and less costly, you might want to think twice about it as it would require much attention and effort from your end. Not everyone has the luxury of time to have regular maintenance for their AC systems.

Admit it, you will not even think of calling in an AC repair professional up until to the point when something needs to be fixed. If everything is working fine, then there is no point in getting a schedule with your local AC repair contractor. However, that is not how air conditioning maintenance works. AC repair experts would have to visit your home regularly to check on your AC systems. It is through their assessment that they could say that the systems are all working fine, or that something has to be done immediately to prevent further damage.

As much as possible, if you have just recently acquired your AC systems, it is important that you get a regular maintenance schedule. This is so you can decrease the probability of wear and tear on your air conditioning systems, and for minor problems to be fixed immediately.

Common Air Conditioning Problems

It is completely understandable if you are not the type of person who will call in an AC repair expert just to have your air conditioning systems checked. Even though this should be the proper way you can care for your ACs, not all people do it. They all have their various reasons, and it is okay if you have your own too. Just make sure that once you have noticed any problems, you book an appointment with an AC repair company.

Let’s take a look at some of the most commonly experienced AC system problems.

Worn contactors

Inside your air conditioning units, you will see a lot of different components. There’s a fan, blower, compressor, condenser, and many more small parts. All of these are valuable to the process of having to lower down the moisture level in your home and maintaining the temperature at a certain point that you have set. Contactors are systems of belts that interlock all of these individual parts together to carry out a fully-functioning air conditioning unit. The contractor receives all the friction and heat brought about by the process. It is only logical that for mechanical parts, the greater the amount of friction they receive, the greater their chances are to wearing and tearing. It is for this reason why contactors should be regularly checked by an AC repair expert. Should there be any problems with the belts, or should it show signs of wearing, a contractor should fix it as soon as possible.

Dirty filters

Filters are essential components to the process of maintaining low temperatures in a certain place. Unclean or dirty filters may be the number one cause of why most air conditioning systems do not work properly. An air filter serves as a barrier for the dust and unwanted particles. Since the filtration process would have to be perfect since contamination of dust inside the AC system could affect its performance, it is not entirely possible to keep air filters squeaky clean since its function is basically to trap the dirt and isolate them. The only solution to avoid having dirty filters is for you to clean or change them regularly. AC repair experts have the proper tools and cleaning materials to clean out your dirty filters. After receiving such treatments, you will be guaranteed that your AC system’s air filters will be able to contribute once again for the AC’s high efficiency.

Clogged drainage

An AC system is built to be a free-flowing process wherein no liquids should accumulate inside. That is why there is drainage included in the design of an air conditioner. However, there could be some instances that the drains would be clogged. The blockage is usually caused by debris, dust, and lint – all of which may not be filtered perfectly. When the drainage gets clogged, the drain pan could fill up the system, causing it to have a leak inside of it. To solve this kind of problem, an unclogging procedure would have to be done by a professional.

Keep An Eye Out For These Possible AC Problems

Once you have invested in an AC system, you should ensure that your AC system is properly maintained. You should hire an AC repair company for the maintenance and repairs of your air conditioning systems. All you have to do is to call in an AC repair expert and let them do the work to ensure your AC system lasts as long as it was intended to!

• 
  +

The post AC Repair: Common AC Problems That You Might Encounter In Your Home appeared first on Penguin Cooling and Heating.

It is recommended by Charlotte heating and air companies that homeowners should have their units checked at least once every six months. That would make it twice a year, at least. There are a lot of reasons behind this suggestion. One of the most important reasons would be for the maintenance of your units. Since heating units could be powered on full blast during winter months, their power source could be running on full power, too. Running everything at its maximum capacity for a long period of time could entail the possible wear and tear of such home equipment.

With that in mind, it is in, indeed, important to have your heating and air conditioning units be properly maintained. Lack of proper maintenance from a credited and licensed Charlotte heating and air companies would merit malfunctions.

Let’s take a look at the other possible problems you might encounter with your heating units.

Problems With The Pilot Light Or Ignition Control

If you have just acquired your home in the past five years, then the chances that you have a modern heating system installed in your home are very high. Modern heating systems usually have one of the two types of ignition systems. These could be either hot surface ignition or intermittent pilot. For both systems, the most common cause of the problem comes from the furnace ignition control. Malfunctions from these systems could cause low or no heat at all. So if your heaters are not circulating much heat, then you should consult these mechanical systems to local Charlotte heating and air companies.

Usually, however, for furnaces that are installed considerably new, it might not have a pilot light for its mechanism. It might have electronic ignition instead. These systems are built to have a flame system that would make sure that the gas inside it will not be flowing without you turning the heater on. Problems associated with these heating units may be harder to deal with. Once you have stumbled upon this type of problem, call in for the services of a credible Charlotte heating and air conditioning repair company.

The Filters Are Clogged Or Dirty

Clogged or dirty air filters would instantly cause your heating units for a restricted airflow. The heating system compensates for this by working harder in order to circulate air that is already damaging to the indoor air quality. Filters that have not been cleaned or replaced for a long time could accumulate so much dirt that could directly affect the limit switch. In this case, the limit switch is usually blown away by the dirty filters. The limit switch is an important part of your heating units since this controls the fan.

The solution for this problem is fairly simple: make sure that you change your filters regularly. While there could be homeowners that truly devote their time to cleaning out their filters, there are also a lot that does not mind the filters at all. You should hire a Charlotte heating and air conditioning unit repair company to help fix the problem.

Lack Of Circulation And Airflow

If you notice that it takes a lot longer for your heaters to bring the temperature up, then you should consider looking at its circulation ducts and airflow. Airflow is usually affected by failing and aging of any parts of your heating unit. These parts may include the motor, belt, bearings, and ducts. When these components are not maintained or repaired on a regular basis, these problems could cause your entire heating system to overheat.

Leaky Ductwork

A leaky ductwork problem is something that you cannot see easily. However, when this type of problem is not resolved as soon as possible, it can cost you a lot of money for repair works. You can check for possible signs of leaking ductwork by walking along with the attic and feel if there is blowing air. Once you spot this issue, you should immediately call in the services of a Charlotte heating and air conditioning company.

Overrunning The Heat Pump

Heat pumps are designed to work efficiently in an environment of fewer than 35 degrees Fahrenheit. Anything that goes beyond this temperature would overwork your home’s heat pumps. If you cannot maintain this kind of temperature in your home, then the problem might be due to various reasons. It could be because of undersized equipment or ductwork, low refrigerant, or bad reversing of compressor valves.

Whenever you encounter problems with your home’s heat pump, make sure that you call in a Charlotte heating and air company that could fix the problem. Since the root cause of the issue is not that hard to point out, hiring an expert will immediately help solve the problem.

Faulty Thermostat

It does not matter whether you have a traditional or a modern thermostat. Whatever mechanism it runs on, thermostats can still be a problem that you can come across. The problem could be because of a battery issue, misused setting, misread temperatures, and the incapability to match it with your current home HVAC setting. One of the most obvious signs that there is something wrong with your heaters and air conditioning units is that your electricity bills are higher than their usual rate. When you encounter this problem, you should already be skeptical of what is happening in your systems. 

Call In For The Services Of A Heating And Air Conditioning Repair Contractor

You should call in a Charlotte heating and air companies to fix any heater problem you may have. These companies are experts in this field, that is why you should rely on them when dealing with your heating problems. Spend less time stressing about your heating problems and hire the experts for the job.

• 
  +

The post What Are The Usual Problems You Might Encounter With Your Heating Units? appeared first on Penguin Cooling and Heating.

Summers can get pretty hot and muggy in North Carolina. If you are living in this area, you know that it’s pretty miserable without air conditioning in Charlotte, NC during the summertime. That is why it is not that uncommon to see that almost every home in the state has their own air conditioning unit. 

Since AC units are relied upon so heavily in the summer, there is a potential possibility that your AC unit could break down. This is what usually happens, especially if you do not regularly call in maintenance services to have your units checked. Chances are your air conditioning unit may not be as efficient as it could be. A common indication of this would be if it takes longer to cool down your home or if it cannot keep a steady temperature while on.  When you start seeing these signs from your AC unit, try to assess whether the following reasons could be the cause of the malfunction and breakage of your air conditioning.

Low Refrigerant In The System

Freon is the chemical refrigerant that is placed inside your air conditioning units. This is what the system uses to remove the heat and humidity in your home. Technically, the refrigerant is only circulated within the system. That means that if the units are taken care of properly, you would not have any problems with the levels of your freon. However, several problems like leaks in refrigerant lines could cause your air conditioning system to have low levels of freon. If you feel like the temperature in your house has changed recently but the settings on your AC unit have stayed the same, then you might be dealing with a refrigerant level problem.

Replacing the freon in the system is not the solution in this case. It is something that only an HVAC repair technician in Charlotte, NC could fix. When you take notice of this kind of problem, you should immediately call in air conditioning repair services. The AC repair technician would not only check the root cause of the existing problem but would also see if there are other affected areas that could cause multiple leaks and further damage in the future.

The Coils Of The Evaporator Are Frozen

The refrigerant or the chemical used for the cooling mechanism of your air conditioning units passes through the evaporator coils. This is where the absorption of heat happens. When there is a problem with the evaporator coil, you would feel its effect almost immediately. Since the main system responsible for the exchange of heat is broken, then you should expect that even though the refrigerant levels are intact, there is no evaporator coil to cool it.

Usually, blocked airflow in the evaporator coils is the main cause of the problem. When something goes wrong with the airflow, that basically means that the evaporator coil will be left frozen. Layers of ice could accumulate inside the coil and would prevent it from further evaporating humid air. An indication of this problem would be getting warm air from your air conditioning units or worse, none at all.

The Condenser Coils Are Already Dirty

Aside from the evaporator coil, another important aspect of your air conditioning mechanism would be the condenser coil. If the evaporator coil is located inside the unit then the condenser coil is a part of the AC unit’s outdoors system. Its job is to get rid of the head that was removed from the air by expelling it outside of your home. Since the condenser could only expel warm air effectively if the ducts are clean, then dirt would have to be its number one problem. The ducts of the condenser coils, due to its location and nature, are prone to having dirt get trapped inside them. The only way for you to prevent this situation from happening is to have your AC units regularly cleaned and checked from a local Charlotte, NC AC repair services company.

Once dirt starts to accumulate in the condenser coils, it could also affect your air conditioning units greatly. It will cause severe wear on its parts and could lead to system failure if not taken care of immediately.

There Are Problems With The System’s Fans

There are two fans inside your air conditioning unit. One that is attached to the evaporator coil to help cool the air, while the other is located near the condenser to help expel the absorbed heat. Thus, by simply looking at why there are fans in the air conditioning units in the first place, you would immediately know that the moment you encounter a problem with either of the fans, the AC unit will be affected.

Some common causes of fan problems could be because of a faulty motor, worn belts, too much dirt and debris inside of it, or lack of lubrication. These problems can be prevented through routine maintenance and check-ups from an experienced and trusted AC repair company in Charlotte, NC.

Thermostat Problems

There are still some older units of air conditioning systems that still have the old dial-type thermostats. Since these are manually adjusted and would need some amount of force to move the dial to its correct position, it could cause your AC unit to have a faulty thermostat dial.

Another problem regarding this thermostats could also be the calibration. For a dial-type thermostat, it is more prone to being incorrectly calibrated. Since the thermostat level is something that you would want to control, if it is not calibrated properly, then that will only mean that your unit will not be receiving the right instructions.

On the other hand, if your air conditioning system has the digital type of thermostats, the technology could be too rather complicated to understand, causing it to be improperly calibrated as well.

Do Not Attempt To Fix These Problems Alone, Call An Air Conditioning Repair Service In Charlotte, NC For Help

It is always recommended to call in a professional AC repair service if your AC unit begins to act up. By trying to fix it yourself, you may only cause more damage to the unit which then could lead to more incurred costs to fix it.  You should call a reliable air conditioning service in Charlotte, NC so you won’t encounter further problems with your air conditioning.

• 
  +

The post Common Problems You May Encounter With Your Air Conditioning Unit appeared first on Penguin Cooling and Heating.